Switch 2 SIP Providers

(1/2) > >>

Nakar81:
In Obi100,

Can I recive and send for 2 SIP providers?

How can I change between both?

Thnaks.

N7AS:
Yes you can.
To call out on SP1 dial **1 + number
To call out on SP2 dial **2 + number
You can make SP1 or SP2 the primary line without having to dial **1 or **2 before the number.

Nakar81:
Thank you.

In Obi110 and Obi202 is the same method?.

jimates:
Quote from: Nakar81 on August 01, 2012, 03:49:41 am

Thank you.

In Obi110 and Obi202 is the same method?.

Yes, except on the 202 there are 4 service trunks.
**1
**2
**3
**4

ianobi:
From OBi Admin Guide

When you want to make a call via a service that is not the Primary Line, you will need to dial that service’s access code before the destination number.
The default service route access codes are defined as:

** 1 : SIP Service Provider 1 or Google Voice Service 1
** 2 : SIP Service Provider 2 or Google Voice Service 2
** 3 : SIP Service Provider 3 or Google Voice Service 3 note 2
** 4 : SIP Service Provider 4 or Google Voice Service 4 note 2
** 8 : PSTN Line Port Service Provider note 1
** 9 : OBiTALK Network

note 1 - OBi110 only
note 2 - Obi202 only

Navigation

[0] Message Index

[#] Next page