Started by QBZappy, August 01, 2012, 07:05:39 PM
Quote from: QBZappy on August 03, 2012, 09:40:13 AMInteresting reading on this topic:To repeat, the half-duplex Ethernet system described in these Quick Reference Guides is obsolete. These Quick Reference Guides to Half-Duplex Ethernet are maintained here for historical reference only.
Quote from: bsdaiwa on August 05, 2012, 05:31:06 PMIs there a way to set this in the OBI Expert Configuration? I looked under network but there were no settings for Ethernet ports.
Quote from: QBZappy on August 01, 2012, 07:05:39 PMNot making this default seems to cause more problems than anything else.
QuoteSwitching your OBi's Ethernet ports to 100 mb/s full duplex:1. Dial *** 02. Enter option 27 and press #3. Press 1 to set a new value4. Enter a value of 1 and press #5. Press 1 to confirm/save6. Hang up7. Wait for the OBi to reboot
QuoteHow to verify the current setting of the OBi's ethernet ports 10 or 100 mb/s full duplex:1. Dial *** 02. Enter option 27 and press #At this point the OBiMAN will read back the current value:0= 10 mb/s1= 100 mb/s