Route VM to SP1
VANJ:
I did try the OBiTalk portal first but that didn't help. Yes, I took a backup from the device config menu.
Quote
You will need to set up each SP1/2 Service with a different Profile if you want each to have its own unique digimap.
ITSP A/SP1 is Callcentric. ITSP B/SP2 is Call With Us. SP2's digit map is the default. SP1's digit map is what I am modifying.
I just received a reply from Obihai support and this is what they said
Quote
in SP1's DigitMap, make sure that *123 is there
Then since your primary line is SP2, then you configure
-> Physical Interfaces -> PHONE
"OutboundCallRoute" to go via SP1 when you dial *123
{(*123):sp1}
I did this and it did work in that when I dial **1*123, it does work. But dialing just *123 gives the fast busy tone and nothing is logged to Call History or Call Status.
Also, there are dozens of *XX codes that I would like to use. Setting each one separately like they suggest is not practical, I thought a single digit map can take care of all of them i.e. route all numbers starting with * through SP1.
QBZappy:
Quote from: VANJ on August 11, 2012, 01:18:51 pm
Also, there are dozens of *XX codes that I would like to use. Setting each one separately like they suggest is not practical, I thought a single digit map can take care of all of them i.e. route all numbers starting with * through SP1.
Try: {(*xxx):sp1}
Note that this may interfere with the built in OBi star codes. Not sure about that since the OBi star codes seem to be all in the *xx format. Try it.
VANJ:
Nope, still get the fast busy tone when I dial *123
QBZappy:
VANJ,
Pressing * directly on the OBi is a special key indicating that is should be dialing one of the prefigured OBi star codes.
http://www.callcentric.com/faq/4#62
How do I dial my voice mailbox?
Please make sure that you have already added voicemail to your Callcentric account. Voicemail is free and can be added or removed at any time you wish.
If you are calling from your Callcentric phone simply dial *123 or *86 to access your voice mail.
If you are calling from a traditional land or mobile phone simply dial the real phone number assigned to your Callcentric account; once you hear the outgoing message dial the star (*) key followed by your voice mail PIN followed by the pound (#) key: *PIN#.
A different approach might help. Can you setup a speed dial calling your CC number, then hitting *.
QBZappy:
VANJ,
This might interest you:
How to Use Calling Codes
http://www.obitalk.com/forum/index.php?topic=791.msg4822#msg4822
Star code features
http://www.obitalk.com/forum/index.php?topic=2312.msg14853#msg14853
Navigation
[0] Message Index
[#] Next page
[*] Previous page