Incoming calls ring on the wrong OBI.

(1/2) > >>

ddajgh:
I have 2 Obis which are set up in my OBItalk.com account.

Obi A, with GV account A.
Obi B, with GV account B. (which I just added)

The problem is that when someone calls the GV account B number, Obi A rings.
How can I change it so that when someone calls GV account B, Obi B rings?

Maybe the only solution is to remove Obi B from the Obi account, and get a new Obi account, just for Obi B.

Thank you!!!!!

jimates:
The call must be coming direct from GV B to Obi A. Did you have GV B set up on Obi A at any time?

ddajgh:
I did not have GV B set up on Obi A at any time.



At first I had it like this:
One obitalk.com account, with 1 Obi device.  Obi A with GV A.  It worked perfectly.

Then I got another Obi device, which I added to the same Obi talk account.  My setup was like this:
One obitalk.com account, with 2 Obi devices.  Obi A with GV A.  (And the new device) Obi B with GB B.
The problem was that calls to GV B would ring only on Obi A.

So, I removed Obi B from the Obitalk.com account.  And made another Obitalk.com account for Obi B.  The set up is now like this:
Obitalk.com account A (the original account) with Obi A with GV A.
Obitalk.com account B (the new account) with Obi B with GV B.

The problem now is that calls to GV B ring on both Obi A and Obi B.
(Calls to GV A ring only on Obi A, which is what I want).

Thanks!

QBZappy:
ddajgh,

If you have not set up any call forking to make the 2nd OBi ring, then that should not be happening. I have recently seen the OBiTALK service handling calls in a way which is not directly under your control.

Just a shot in the dark, can you turn off the OBiTALK service on your unit and see if both units still ring? Since you are certain that you have not configured both units to ring, then it might be interesting to investigate if it is the OBiTALK service which is handling this behavior. It is not immediately obvious to most users that there are some unit configurations not under our control.

Voice Services->OBiTALK Service->Enable (remove check mark)

jimates:
check the call history on both Obi's. Since the calls are still ringing Obi A I suspect the call is going from GV to both Obi's.

I doubt the call history is going to show any forking of calls, meaning the Obi is not the one sending the call to Obi A.

Did you recently change anything with google; move google voice numbers to different accounts, etc. Do you have 2 google talks listed in GV A account?

Navigation

[0] Message Index

[#] Next page