Can I forward a call made into a remoteOBi to a PBX system using an IP address?

(1/3) > >>

larrybob:
I have a obi in Indonesia, and a PC based wave PBX system in callifornia.  The Obi in Indonesia receives calls on the line port. I can forward the calls using sp1 to a number in the U.S.. Is it possible to forward calls directly to a PBX in california, using an ip address and port number of the pbx system.

Thanks
Larry

QBZappy:
sip uri calling is what you need to know: xxx@wanipadress(DDNS name):port

Our friend ianobi in the UK has given us an idea on how to accomplish this.
    
SIP URI Dialling From OBion/OBiapp via OBiTALK
http://www.obitalk.com/forum/index.php?topic=3662.msg24357#msg24357

Pay attention to this part. The CF (forking) could be setup in this format.
Quote from: ianobi on July 14, 2012, 02:41:20 am

An added bonus for those who like to dial directly into their obi not via OBiTALK and who use a ddns service as their obi address, is that you can now effectively dial 12345@someplace.org@my.ddns.uk by using the format **212345+someplace.org@my.ddns.uk.

larrybob:
I am not sure if sip URI dialing  is what I need?   I believe i want to send the calls to 66.7.248.109   UDP port 70050.

Is this possible?  
Thanks
Larry

QBZappy:
Is the OBi  setup as an extension off the pbx?

larrybob:
The Pbx is a PC PBX system Made by Wave. I do not know too much about PBX set up :(  .... I was given the IP address number 66.7.xxx.109  with port 70050. by the company using the PBX system. I believe they received this information form the Voip service provider that is being used in the PBX system. I have requested if there is a user name that is associated with these.

This is the goal:
Have calls into the line phone number connected to the OBI in Indonesia, route directly to the PBX in California.

If the OBi needs to be configured as an extension of the pbx , and this can be done with the OBI and the PBX in two different countries, let me know what parameters I will needfrom the OBI to do this.

If I can route the calls directly from the OBi , It seems that either the pbx system or the voip provider needs to be able to receive SIP URI CALLS.

To summarize, i need a little education here about PBX systems and voip providers and the function of each in receiving sip URI calls.
Thanks Larry
Larry

Navigation

[0] Message Index

[#] Next page