OBiAPP & X Lite Setup Configurations?
tavie888:
Hello,
I installed X-Lite version 5.0 then OBiAPP.
1. X-Lite: SIP Account > Topology tab:
What should I use for "Firewall Traversal Method"?
2. OBiAPP: Advanced tab:
What should be the IP addresses for:
a) SIP Domain or Proxy Local Address?
b) OBiTalk Local Address?
3. Should I port-forward the RTP Ports for SIP Domain (Port #36000) and OBiTalk Local Address (Port #36100)?
4. How can I re-open OBiAPP to enter the IP addresses in Item#2 above, since it only opened the first time I configure X-Lite?
Thanks in advance for your help.
tavie888:
Hello,
I made a mistake of installing X_Lite BEFORE OBiAPP, instead of the other way around. Had to re-install X-Lite (chose "repair" installation).
OBiAPP (ver.1.1.0 Build 1944)
Right clicking its icon in Windows taskbar notification area >Login
MyOBi Tab:
OBi Talk Number: 290xxxxxx (from Soft phone in OBi Portal)
Voice Gateway: xxxxxxxxx (9-digit device/OBi number on the box)
Advanced tab:
SIP domain or Proxy local address:
IP address: Default ( I chose default instead of 192.168.1.x from drop-down menu. Machine having X-Lite is a wireless client)
SIP Port: 506X where X is non-zero (default 5060 results in soft phone not registered)
RTP Ports: 36000 (default)
OBiTalk local address:
IP address: Default (same reason as above)
Signaling port: 10000
RTP Port: 36100 (default)
X-Lite
Softphone > Account settings >SIP account > Account tab
Account name: OBiAPP
User ID: 290xxxxxx (OBi number, from the box)
Domain: 127.0.0.1
Domain proxy: Check "register with domain and receive calls"
Send outbound via "Proxy address: 127.0.0.1:506X" where X= same non-zero digit as set in 506X (OBiAPP >SIP Port Number)
Topology tab: Firewall traversal: Autodetect firewall traversal using ICE (recommended)
In OBiAPP, I have already saved the SIP Port number (506X) but whenever I turn on the PC, this port number keeps reverting to 5060 resulting in soft phone client not being registered. I then had to change SIP port number back to 506X before soft phone is registered. Furthermore, the Status tab of OBiAPP now shows a different SIP port number:
SIP:290xxxxxx@127.0.0.1:5062
I can make a soft phone call via OBi Voice Gateway, but still get bothered by having to re-enter SIP Port number every time I want to use the soft phone. It does not matter if I use IE or Firefox browser, whereas previously I had to use IE to set up SIP account credentials in OBi110. Any suggestions?
TIA
GregoryZ:
Log out of the OBiAPP
Change the Port Number in the OBiAPP.
Click "Save"
Log In again.
Log Out again, but don't close the OBiAPP.
See if it changed back to 5060 or stayed the way you set it.
If is saved it, close the OBiAPP, and restart.
Let us know if that fixed it.
-G
tavie888:
Hello GregoryZ,
Thanks for your reply, but how can one change SIP Port number after logging out of OBiAPP? Your instruction seems confusing to me.
Anyway, I solved the problem by:
1. Uninstalling then re-installing OBiAPP
2. Log in OBiAPP
3. OBiAPP:
MyOBi tab: shows same input values as before
Advanced tab: SIP Port = 5060, everything else shown to be same as before
4. X-Lite:
Soft phone > Account settings > SIP Account > Account tab
...Send outbound calls via:
Proxy address: 127.0.0.1:5060
Save
5. OBiAPP > Status tab shows X-Lite is registered:
State: Registered
Contact: <sip: 290xxxxxx@127.0.0.1:5062>
I believe in #4, domain proxy address has to be 5060 for softphone client to be registered. Don't know why in OBiAPP the Status tab shows SIP Port 5062.
GregoryZ:
Quote from: tavie888 on August 20, 2012, 09:56:23 pm
Thanks for your reply, but how can one change SIP Port number after logging out of OBiAPP? Your instruction seems confusing to me.
:) Don't confuse "logout" with closing the OBiApp.
IF your OBiAPP is showing as an icon in the notification area, right click on it and choose "Properties" Then in the lower left hand click "Logout" Click the "Advanced" tab. There you can change the Port Number, and continue as I described above.
If things are working for you the way you have them, then I guess you're set.
Best of Luck!
-G
Navigation
[0] Message Index
[#] Next page