Two OBi's on the same home network?

[rsgoodin]

I have an OBi-110 and an OBi-202 at home on the same network.  I'm connecting the phone output from the 202 into the line input of the 110.

Calls made to any of the 202's numbers are working fine.  However, I'm not receiving any of the 101's SP1 and SP2 calls (the 202 comes into the 110 and I am getting calls ok on the 110's phone port).

Could there be a port conflict?  Is there a means of assigning a different port to the OBi-110?

Is there anyway to use both OBi's at home?

Shawn

[jimates]

Your configuration should work.
Obi202 phone port 1 or 2 connected to the Line port of the 110.
House phone connected to the phone port of the 110.

Any call coming in on the 202 that is directed to the phone port connected to the 110 should ring the phone connected to the 110.
Also, any calls coming in on sp1 or sp2 of the 110 should ring the phone connected to the 110.

You should first make sure the 110 is functioning correctly and receiving it's calls to it's phone port. Then plug the 202 into it. Connecting the 202 should not change anything.