Digitmaps for Spain

(1/3) > >>

Nakar81:
I live in Spain.
I want make all call from PSTN, excep international call (00number). The number 112 is a emergency number (PSTN line).

Are correct this values?:

--- PHONE Port ---
DigitMap:
(112(Mli)|00[1-9]x?(Msp1)|**0|***|#|**1(Msp1)|**2(Msp2)|**8(Mli)|**9(Mpp)|(Mpli))

OutboundCallRoute:
{112:li},{00[1-9]x?:sp1},{**0:aa},{***:aa2},{(<**1:>(Msp1)):sp1},{(<**2:>(Msp2)):sp2},{(<**8:>(Mli)):li},{(<**9:>(Mpp)):pp},{(Mpli):pli}

CallReturnDigitMaps:
{pli:(xx.)},{sp1:(<**1>xx.)},{sp2:(<**2>xx.)},{li:(<**8>xx.)},{pp:(<**9>xx.)}

PrimaryLine:
PSTN Line

And the same value in "Auto Attendant 1".

ianobi:
This should work for you:

Phone Port DigitMap:
([1-9]x?*(Mpli)|[1-9]S9|[1-9][0-9]S9|112|**0|***|#|**1(Msp1)|**2(Msp2)|**8(Mli)|**9(Mpp)|(Mpli))

Phone Port OutboundCallRoute:
{([1-9]x?*(Mpli)):pp},{(<#:>|112):li},{**0:aa},{***:aa2},{(<**1:>(Msp1)):sp1},{(<**2:>(Msp2)):sp2},{(<**8:>(Mli)):li},{(<**9:>(Mpp)):pp},{(Mpli):pli}

ITSP A
DigitMap (Msp1)
(00xx.)

It is best not to change Phone Port DigitMap or Phone Port OutboundCallRoute to achieve routing changes. I have only replaced 911 with 112.

No need to change CallReturnDigitMaps, just leave at default.

Nakar81:
I dont change Phone Port DigitMap, Phone Port OutboundCallRoute and CallReturnDigitMaps (only 911 -> 112)

PrimaryLine: PSTN Line
ITSP A DigitMap (Msp1): ( 00xx. | <:0034>[5-9]xxxxxxxxS0 )
ITSP B DigitMap (Msp2): ( 00xx. | <:0034>[5-9]xxxxxxxxS0 )

Its a good config?

when change PrimaryLine to PSTN Line, this is automatically changed to SP1 Service
:(
Act: ObiTalk (web) overwrite change to device.

ianobi:
Let us know what 00 numbers you wish to call. If they all start 0034 followed by one digit in range 5 to 9, then another eight digits then (0035[5-9]xxxxxxxx) will work fine. Add the 00xx. rule to allow any number starting with 00.

When you make the changes to the PrimaryLine you need to uncheck the two boxes to the right of that setting and leave them unchecked, then press submit.

Let me know how you get on - it's a learning process. Have a go, make mistakes - we all have :)

Signing off for today - back sometime tomorrow.

ianobi:
Also, read:

http://www.obitalk.com/forum/index.php?topic=92.0

Navigation

[0] Message Index

[#] Next page