Make OBI pass a call onto another OBI

(1/2) > >>

Hortoristic:
Is it possible to say take a DID on an Obi device and make it ring on another Obi?

For example:
Obi1 - SP2 - DID is called, but Obi2 - SP1 rings the phone?

QBZappy:
Quote from: Hortoristic on August 22, 2012, 07:51:39 pm

Is it possible to say take a DID on an Obi device and make it ring on another Obi?

For example:
Obi1 - SP2 - DID is called, but Obi2 - SP1 rings the phone?


This might work.

Obi1 - SP2 X_InboundCallRoute = pp(obxxxxxxxxxObi2)
Obi2 - OBiTALK InboundCallRoute = pp(obxxxxxxxxxObi1):ph

Note: Set Obi1 - SP2 CID spoofing option on so that the CID will pass to the second OBi. You can have both OBis ring if you add ",ph" at the end of the first line. This way Obi2 - SP1 is still available to receive calls.

Let us know if this works out.

Hortoristic:
The Obi2 device (the end point that has the phone attached that I want to ring) - has information in the InboundCallRoute.  Not sure if that's my OBI Android app number or what it is but it's not the default:

{(290167246)>(xx.):SP1},{(290167246):aa},{ph}

Should I add your settings to existing or maybe just replace it?  I use GrooveIP for calling out on VOIP on cell - so I don't really use Obi app for calls.

QBZappy:
Hortoristic,

Just replace it since you don't use the OBiAPP.

Hortoristic:
Not sure of my syntax:

On the Obi device that has SP2 configured with the DID - let's call it RemoteOBI, and the Obi I want to ring, let's call it DestinationOBI:

So on RemoteOBI - (the value number is my DestinationOBI number)
RemoteOBI -> Voice Services -> SP2 Service -> X_InboundCallRoute = {pp(ob200550666)}

Then on DestinationOBI - (the value number is my RemoteOBI number)
DestinationOBI -> Voice Services -> OBiTALK Service -> InboundCallRoute = {pp(ob201954166),ph}

Seems to be working but Both OBI's are ringing the phone - I only want the DestinationOBI to ring.

Navigation

[0] Message Index

[#] Next page