Two Different Google Voice Accounts
RonR:
The OBi110 supports one single-line telephone connected to the PHONE Port. Incoming calls from any source (SP1, SP2, OBiTALK, or LINE) will ring this phone (with call waiting should a second call come in).
Outbound calls are made by default through the trunk selected by:
Physical Interfaces -> PHONE Port -> PrimaryLine : (SP1/SP2/OBiTALK/PSTN Line/Trunk Group 1)
Outbound calls can be forced to a specific trunk by prefixing **1/**2/**8/**9.
The LINE LED will light if there is telco line connected to the LINE Port.
The PHONE LED will light if the service selected by PrimaryLine is active (for selections of SP1/SP2/OBiTALK).
I think the colorful symbols you're talking about is a pull off piece of tape that protects the silk-screening next to the LEDs.
whitestar:
Thanks for clearing things up. I was confused about the purpose of the line port. I thought it was optimized for data or voice, making it worth the extra money over the Obi100. But I guess its for bridging connections and such, which I have no plans to do.
It would be really nice to have 2 phone ports, one for each provider. At least for my situation, with both accounts connected to the Phone port, when the phone rings it could be either for me or my parents and we wouldn't really know without answering. Again, I am so used to a Linksys PAP2, which is what I had them using before until G5 was shut down and no other SIP provider has worked as well.
Navigation
[0] Message Index
[*] Previous page