FAX T.38
OBiSupport:
The OBi202 works with Anveo T.38 services.
DaveKaye:
I also used Billt928 recommendations and got my fax to work with Obi and CC. Reps to Bill. However, I did not enter a Public IP address (not sure what that means. I use Comcast and my IP address can change - especially if I reboot the modem and my Fax machine IP address is non rout-able 192.168..... ) . I disabled all the codecs but the two in the config. I don't understand why I had to disable the T38 codec as per the instructions. I also carefully went through all the menu choices for my Brother MFC fax and made sure everything was set correctly (Brother has a FAQ on VOIP and Fax). I used the HP test number and was able to send a receive (1 page). I seldom receive a fax, but on occasions I still have to send one.
Billt928:
Quote from: DaveKaye on January 02, 2013, 06:27:03 pm
I also used Billt928 recommendations and got my fax to work with Obi and CC. Reps to Bill. However, I did not enter a Public IP address (not sure what that means. I use Comcast and my IP address can change - especially if I reboot the modem and my Fax machine IP address is non rout-able 192.168..... ) . I disabled all the codecs but the two in the config. I don't understand why I had to disable the T38 codec as per the instructions. I also carefully went through all the menu choices for my Brother MFC fax and made sure everything was set correctly (Brother has a FAQ on VOIP and Fax). I used the HP test number and was able to send a receive (1 page). I seldom receive a fax, but on occasions I still have to send one.
The brother test fax number only does G711
jeetco:
I have not had success with Anveo and OBI202 for the purpose of faxing. I am now trying Callcentric and will be using Billt928's "formula". Having said that, can someone "translate" this digitmap please (I am digitmaps "challenged"):
(*xx.|*123|**275*x.|[3469]11|1xxxxxxxxxx|<1Your Area Code>[2-9]xxxxxx|<1>[2-9]xxxxxxxxx|011xx.|xx.|(Mipd)|[^*]@@.)
I ask this--if I have to do any slight adjustments, then I know what the above digitmap means and what changes I am making!!
Thanks in advance...
ianobi:
This probably beongs in a different thread, but here goes anyway:
*xx. Allow * followed by one digit, then by one or more digits. This gives access to all of CallCentric’s Star Codes.
*123 Allow * followed by 123 (voicemail). The *xx. would also allow this!
**275*x. Allow any number of digits starting with **275* This gives access via the SIPBroker network.
[3469]11 Allow 311, 411, 611, 911 If you are not using this service provider for 911, then I would delete the “9” to avoid 911 calls routing this way by accident.
1xxxxxxxxxx Allow eleven digit numbers starting with “1”.
<1 Your Area Code>[2-9]xxxxxx Allow any seven digit number starting with digits 2 throught to 9, then prepend “1” and your area code.
<1>[2-9]xxxxxxxxx Allow any ten digit number starting with digits 2 through to 9, then prepend “1”.
011xx. Allow any number of digits starting with 011 (international calls).
xx. Allow any digit followed by any number of digits. This is a “catch-all” rule for any number that does not match any other rules.
(Mipd) User Defined DigitMap that allows SIP URI dialling from a telephone key pad. Does anyone ever use this?
[^*]@@. Allow any alphanumeric character except * followed by any number of any alphanumeric characters. Used for SIP URI dialling from speed dials etc. A better rule is [^*]@@.'@'@@.
I recommend deleting any rules that you will never use. Rules such as xx. and [^*]@@. accept any number as far as digits are concerned and can cause confusion.
Navigation
[0] Message Index
[#] Next page
[*] Previous page