Help Dialing 911

<< < (2/2)

CoalMinerRetired:
Ok, see this thread, 1st post, the second "A" section, start where it says "Configuration for the Obi100"

http://www.obitalk.com/forum/index.php?topic=339.0

Based on all the bakc and forth in tha thread, if it were me doing this, I'd figure out a way to positively test it without having the police roll out to your place for a "911 hangup call".  Not sure how to do that.

jimates:
bsdaiwa,

everything can be done from the dashboard without changing anything in the configuration.

Click on the device in the list
Click on the gear icon to the right of the google voice account on SP1
make sure there is a check mark for "Make This Service the Primary Line to Call Out"
Click Submit
Click on the gear icon to the right of the CC account on SP2
Put a check mark in the option for "Use This Service for Emergency 911 Calls"
Click Submit

everything is then automatically configured.

You can check the settings in the Expert Configuration, by going to the phone port settings, SP1 Service should be selected for PrimaryLine.
Then look at the OutBoundCallRoute for the phone port
SP2 should be inserted after 911 ........li},{911:sp2},{**......

bsdaiwa:
Thanks to both jimates and CoalMinerRetired for all your help. Prior to seeing the post from jimates I manually inserted the code. I called 911 and it worked.
I have another OBi and I followed jimates instructions on it and it inserted the code.
So either way works but I think the best way would be jimates.

Thanks again for help from both of you.

Navigation

[0] Message Index

[*] Previous page