December 17, 2017, 09:35:47 am *
Welcome, Guest. Please login or register.
News:
 
   Forum Home   Search Login Register OBiTALK  
Pages: 1 [2]
  Print  
Author Topic: Instructions for Setting Up OBiAPP with X-Lite  (Read 580418 times)
dmpayne1957
Newbie
*
Posts: 12


« Reply #20 on: January 27, 2016, 02:53:37 pm »

I used the instructions...i can dial out...the phone connects...i can hear the other party - but they can't hear me...any idea on what i need to do to be able to be heard?  I did the test on the x-lite interface - and it says my microphone is working
Logged
azrobert
Hero Member & Beta Tester
*****
Posts: 3204


« Reply #21 on: January 27, 2016, 03:57:05 pm »

The OBiApp for PC is no longer supported. I use the Phonerlite softphone.

This setup assumes GV is defined on SP1 and a SIP provider is defined on SP2. Use OBi Expert to make the config changes on the OBi110.

If SP2 is undefined, create a dummy definition like this:
Service Providers -> ITSP Profile B -> SIP -> ProxyServer: 127.0.0.1
Voice Services -> SP2 Service -> AuthUserName: anything
Voice Services -> SP2 Service -> X_RegisterEnable: unchecked
Voice Services -> SP2 Service -> X_ServProvProfile: B

OBi110
Service Providers -> ITSP Profile B SIP -> X_SpoofCallerID: Checked

Voice Services -> SP2 Service -> X_InboundCallRoute:
{OBi110>(Msp1):sp1},{ph}

Voice Services -> SP1 Service -> X_InboundCallRoute:
ph,sp2(anything@192.168.1.100:5060)
Change 192.168.1.100 to the IP address of the computer running Phonerlite.
5060 is the Port number for Phonerlite

Download and install Phonerlite:
http://www.phoner.de/PhonerLiteSetup.exe
When you start Phonerlite I think a wizard will popup because no accounts are defined.
Proxy: 192.168.1.110:5061      (IP addr & Port of SP2 on the OBi110)
Click right arrow.
User Name: OBi110
Click right arrow.
Change Profile Name: OBi110
Click check mark
Uncheck box next to Register
Save

Dial a number and click the green phone symbol.
You can use the keyboard to dial a number.
Click red phone symbol to hang up.
Logged
dmpayne1957
Newbie
*
Posts: 12


« Reply #22 on: January 28, 2016, 05:23:59 am »

thank you...obviously i am a novice...ok...I've made the changes...question on this change:

Voice Services -> SP1 Service -> X_InboundCallRoute:
ph,sp2(anything@192.168.1.100:5060)
Change 192.168.1.100 to the IP address of the computer running Phonerlite.
5060 is the Port number for Phonerlite


*how do i find out what my IP address is?
*when i had this working on my old computer - in this box...the string included my cell phone number
« Last Edit: January 28, 2016, 09:13:36 am by dmpayne1957 » Logged
Studio_Musician
Newbie
*
Posts: 2


« Reply #23 on: February 09, 2016, 07:04:35 pm »

go to a dos prompt, or "search programs and files" and type cmd, then click on cmd.exe, or click on "Command Prompt" found here -> Start Menu >> All Programs >> Accessories >> Command Prompt -- and then type ipconfig and hit the return/enter key.  you should see your ipv4 ip address if you are connected to the internet.
Logged
Pages: 1 [2]
  Print  
 
Jump to:  

Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC