Solved: (403 Forbidden - no OBP)
mrjoe:
I was forced to use an Outbound Proxy (same as regular proxy 192.x.x.x:5060) for this setup as there is no Audio if I don't.
Calling through PAP2 I get:
(403 Forbidden - no OBP)
10 seconds after the call connects it hangs up and shows the above in Call History.
It has something to do with the connection between the PAP2 and the Obi110 not the SP as calls to **9 222 222 222 also produce the same results.
Anyone know what the problem is?
QBZappy:
mrjoe,
Quote from: mrjoe on September 02, 2012, 02:00:13 am
Calling through PAP2 I get:
(403 Forbidden - no OBP)
I suspect it has to do with registration between the units. I believe that the units do NOT need to be registered. Have a look at the settings for registration on both units.
mrjoe:
Thanks for your response,
the Linksys is not registered and the SP1 is using voiptalk.com
QBZappy:
"At least one Voice Service (SP1/SP2) must be configured for SIP. It need not be registered with a SIP provider. If you're not using a SIP provider, you must still set ProxyServer (127.0.0.1 is fine) and you should disable X_RegisterEnable."
You have not mention how the OBi is set up. Have you followed above mentioned setting? Especially the last part.
mrjoe:
I have SP1 set up with a VoIP Company
The PAP2 is set not to Register and to make and receive calls without registering, Proxy and Outbound Proxy is 10.100.101.105:5060
User id: pap2
it is set up exactly as RonR directed besides for the addition of the Outbound Proxy due to the lack of Audio.
Navigation
[0] Message Index
[#] Next page