Solved: (403 Forbidden - no OBP)

<< < (2/3) > >>

QBZappy:
Sorry, I don't own a pap2. Someone else will need to pickup from here.

mrjoe:
QBZappy,
Would you know why there was no Audio when I copied RonRs instructions exactly?

QBZappy:
No audio usually means that you need to do some port forwarding on the router. If you managed to make the phone ring, then that should be the final piece of the puzzle. You probably need to port forward the RTP ports of the SPx you are using:

Service Providers
    ITSP Profile A/B
        General
        SIP
        RTP   <- This one

mrjoe:
I'm not so clear what Port Forwarding is or how it works or how to set it up for that matter.

I looked where you told me and did the following:
   
Local Address of Obi110: 10.100.101.105 Protocol:   UDP Start Port:   16600 End Port:   16798

It didn't change anything, but is that what I was supposed to do?

QBZappy:
mrjoe,

Not saying that it will fix the problem, but if you say that the phone rings and that there is no audio then port forwarding is likely the problem.

You will need to port forward that UDP port range inside your router. This site will explain how to do it.
http://portforward.com/

Navigation

[0] Message Index

[#] Next page

[*] Previous page