SIP scanners

<< < (36/37) > >>

Taoman:
Quote from: ScottS on February 10, 2018, 03:11:41 pm

Hi, where is this setting in the Obi302> "EnforceRequestUserID" ?



I only have the 1xx and 2xx series but I assume it would be in the same location:

Voice Services-->SPx Service-->SIP Credentials

ScottS:
yes TY! obiTalk parameter was unchecked by me.

found Inbound routing unchecked both and edited to block
& Have been using back up feature.
IF both Inbound routing boxes unchecked, it appears that line is not saved. I searched in wordpad but not found.
so started a text file to save that line.
What else should I do? I have several backups now JIC.  
TY!

Taoman:
Quote from: ScottS on February 12, 2018, 03:08:28 pm


What else should I do? 



Voice Services-->SPn Service-->X_AcceptSipFromRegistrarOnly

Check the box for that parameter.

ScottS:
Phonepower list setup 
Click the Enter OBi Expert button.
Click to enlarge
• On the left hand side of the new page, expand the menu for Service Providers by clicking on it.
Click to enlarge
• Click on ITSP Profile A SIP.
Click to enlarge
• Scroll down until you see the section for X_AccessList.
Click to enlarge
• Click the box on the checked box on the far right to uncheck the box.
• In the text entry box to the right of "X_AccessList" please enter

    208.64.8.6,206.15.130.6,206.15.150.6

Works on my Obii302s w/ latest firmware

Quote from: lacibaci on September 06, 2012, 05:50:04 am

Is there a way of preventing SIP scanners from ringing my phone at night?....
...

flamaest@gmail.com:
Quote from: ScottS on April 02, 2018, 11:35:48 am

Phonepower list setup 
Click the Enter OBi Expert button.
Click to enlarge
• On the left hand side of the new page, expand the menu for Service Providers by clicking on it.
Click to enlarge
• Click on ITSP Profile A SIP.
Click to enlarge
• Scroll down until you see the section for X_AccessList.
Click to enlarge
• Click the box on the checked box on the far right to uncheck the box.
• In the text entry box to the right of "X_AccessList" please enter

    208.64.8.6,206.15.130.6,206.15.150.6

Works on my Obii302s w/ latest firmware

Quote from: lacibaci on September 06, 2012, 05:50:04 am

Is there a way of preventing SIP scanners from ringing my phone at night?....
...



Can we please get these steps detailed for an OBIHAI 202 which is just using GVoice?  I turned off DMZ on my router and I still see {much less} phantom calls come in, but the ones that make it through into the obihai are sometimes at 2 or 3 am!  I am about to toss this thing in the garbage. 

Navigation

[0] Message Index

[#] Next page

[*] Previous page