I have OBi 202 with 2 different providers configured on SP1 and SP2 . Both ring on Phone1 port.
Analog phone with 4 line LCD display is connected to OBi Phone1 port.
What has been happening with incoming calls to both lines is that first correct caller ID appears on LCD display and then several seconds later it is replaced by "UNKNOWN CALLER". So there are 2 caller ID entries for each calls.
I disabled SP2, rebooted, called my number and the problem disappeared.
I then enabled SP2, rebooted, called my number and problem didn't come back.
Is this a known issue?
