News:

On Tuesday September 6th the forum will be down for maintenance from 9:30 PM to 11:59 PM PDT

Main Menu

Pause during dialing?

Started by ragmanii, September 13, 2012, 05:29:47 PM

Previous topic - Next topic

ragmanii

Is there a way to pause while dialing? I have entered the dial string to transform a 911 call to the 10 digit emergency number, but after the call is picked up another number (2) has to be pressed to verify that this is actually an emergency call..

Something like this:
{(<911:XXXXXXXXXX[pause 3 seconds]2>):sp1}

QBZappy

#1
ragmanii ,

Seems this might work:
   
Re: Any way to insert a pause when dialing out on the OBi110 LINE port?
http://www.obitalk.com/forum/index.php?topic=112.msg317#msg317

Quote from: MichiganTelephone on February 04, 2011, 04:20:32 PM

 The "w" works just fine...  

The <S1> might work but FreePBX hates it, and even when I tried a trick to force it, it was still dialing extra digits.  A lone S (no 1, nor angle brackets) seemed to produce a one second (or so) pause.
Owner of the 1st OBi110/100 units in service in Canada & South America. 1st OBi202 on my street. 1st OBi1032 in Montreal.