OBI110 is flashing red & green

[farshad]

Recently after a power cycle I noticed that my OBI110 after power up starts flashing in green LED and after a few seconds it alternately flashes green and red. Does any boy know the reason or solution to this problem? as It does not come up at all.
Thanks,

[seshu]

I am having the same problem.. looks like no solution

[JoeSchmoe007]

Try hard reset via hole in the bottom (this will reset everything to factory settings). My OBi 202 went into reboot loop when I initially tried to configure it manually and this fixed it.

[pc44]

flashes green and red.

[It's too early for Christmas lights, but I *did* see just today that someone has already put up their Christmas Tree.  However, I digress.]

Back to the real problem:  JoeSchmoe007's advice is good advice!  Resetting and then updating to latest firmware is your best bet.

Do let us know of your progress,
pc44