# not working like it used to..any advice??

<< < (3/3)

strain17:
Has the LinePort barge-in behavior changed from firmware 2711 to 2744? It seems that now it takes about 3 secs to barge-in to the POTS line on the 110. Prior to this, I used to be able to dial "#" and receive dial-tone from the POTS line under 1 second (almost immediate). I also found that dialing "##" would achieve the same result (instant POTS dial tone).

At first I thought this was related to the interdigit timeout, but then, this is just seizing dial tone prior to even dialing, so I'm thinking it is something else.

Any one have the same issue? Any ideas?

ProfTech:
Made a couple of quick tests here and don't see any difference in 2744.

Navigation

[0] Message Index

[*] Previous page