Canada Caller Id - OBi110

(1/2) > >>

brucester4:
Has anyone got caller ID working correctly in Canada?  I sent an email to support and they suggested that I post the question here in case anyone has a solution:

Caller ID is not working on the line port.  I have increased the Ring Delay as suggested in the support forum and it has not changed.  The Caller ID is not shown in the Call History and the telephone shows nothing in the Caller List.  The Caller ID works correctly with Google Voice and Anveo.  The telco is Bell Aliant in Nova Scotia Canada.  I have read that the Caller ID system is different in Canada and that may be the problem?  Is there any other troubleshooting steps I can take?

QBZappy:
brucester4,

Welcome.
The default setting works for me:
Physical Interfaces=>LINE Port=>CallerIDDetectMethod = FSK (Bell 202)

CoalMinerRetired:
You didn't mention, so I'll ask:

1. The Bell Aliant line has Caller ID enabled?
2. You can plug a Caller ID capable handset directly into that line, (i.e., eliminating the Obi110) and receive a valid Caller ID?
3. With the Line port plugged into the Obi110, and receiving a call from the same incoming number, you do or do not see Caller ID.  

Based on this "the Caller ID is not shown in the Call History and the telephone shows nothing in the Caller List," or if you answer no to 2, and no to 3, possibly this is the issue.

brucester4:
CoalMinerRetired:

1, Yes, Caller ID is enabled.
2. Yes,I can receive valid caller ID on the handset directly plugged into the line.
3. No, I don't see Caller ID with the line port plugged in.

QBZappy:
brucester4 ,

1) Not sure what this setting does, however it looks interesting. Try incrementing (+/- ) this value.
Physical Interfaces=>LINE Port=>DTMFPlaybackLevel

Navigation

[0] Message Index

[#] Next page