Obi100 rings on for 6-10 rings after google voicemail kicks in.
jimates:
Quote from: HappyJack on October 18, 2012, 07:01:19 pm
thanks for your reply. followed your instructions and disabled "call waiting" on phone port and also
enabled "mulitple outbound calls at the same time" in CC.
My format is as follows: **1x xxx xxxx not sure if this is correct.
Instead of sudden disconnects I'm getting a busy tone.
Any ideas?
your forwarding number should be in this format sp1(1xxxxxxxxxx)
what does the call history show. it should show the incoming call and then a separate forwarding call. And it will tell you what happened to the call (answered, fail, busy etc.).
to access the call history log into the device using the ip address returned by dialing ***1. The default UN & PW is admin and admin.
HappyJack:
tried that format Sp1(1xx....) with no luck, then tried the **1xxxxx... and got a busy signal.
Don't see anything listed in call history referencing my calls failed and being forwarded.
Don't say any evidence that call forward when busy or unanswered is even enabled in history
I'm starting to wonder if I may have a defective unit...so many things not working the way it should
recently...with the ringing on of the obi when call was answered and now this.
Also having problems getting the phone attached to the obi to ring when forwarded to google chat.
It was working before then stopped all of a sudden and couldn't get it back working again.
Navigation
[0] Message Index
[*] Previous page