050plus.com (Japanese SIP provider) - having trouble
DPUkyle:
@VOIPisGreat:
Yes, unfortunately everything is expensive in Japan :)
I agree with Leozou that having an incoming number capability (DID?) within Japan and for no monthly fee is the prime motivation for using the Fusion IP-Smart service. It is also post-billed, so no need to prepay. Many 050-prefixed IP providers also provide free calling among members (list below*). Finally, since I'm in Tokyo I trust that Fusion's servers are going to have much lower latency compared to a cheaper provider but whose servers are outside of Japan.
About your obi configuration, you could consider using a hosted trunk somewhere else such as pbxes.org. I'm very new to VoIP, but my understanding is that if you set Fusion IP-SMART as a trunk, you could then set a separate extension on the trunk for free "internal" transfers. I'm doing something similar but with Google Voice. I do believe doing this with Fustion would requires a premium pbxes.org membership.
For reference, this is my personal setup:
Obi 110:
SP1: Extension 300 of pbxes.org trunk
SP2: Fustion IP-SMART account
pbxes.org is hosting my Google Voice trunk.
Android phone native SIP dialer ("Internet Calling"):
Extension 200 of pbxes.org trunk
SP1 is the default for outgoing calls which is my US Google Voice number. But I can also use this as the outgoing number from the Android SIP dialer. Further, I can dial 300 from the Android dialer which rings SP1 on the Obi 110. Pretty cool.
When I want to make an outgoing call from the Fustion IP-SMART (SP2), simply dial **2 to temporarily "switch" to SP2.
@Leozou:
As you know, ring and dial tones are slightly different between US and Japan. I can successfully make outgoing calls from my ATA, bince the Obi ATA is preset for US values there is no dial tone.
I know this thread is probably not appropriate but if you know of the proper settings for Japan dial tone, etc. please share. I believe the would be set at:
Obi Expert Configuration -> Tone Settings -> Tone Profile A/B
日本語でも構いません。よろしくお願いいたします。
* http://www.fusioncom.co.jp/kojin/smart/ip-isp/
Leozou:
Hi, DPUkyle
About ring and dial tone, I'm using default setting.
Sorry for I can not help you.
自分はアメリカで購入した電話機をObi202に接続して使っているためか、特に問題ないのでダイアルトーンの設定を変更していないのです。
TTAZ:
Quote from: Leozou on April 08, 2013, 08:01:17 pm
Hi,
Yes, Fusion's 8.4 yen/30 sec is expensive compare to other SIP.
http://www.teradas.net/archives/4514/
http://www.ipden.jp/price.html
Follwoings are reasons why I choose Fusion.
- In-coming call capable with Japanese phone number
- No basic fees
- Cheap at short call to cell phone
- Major mother company
P.S.
I sometime use Google Voice for out-going call.
Please tell me how to set my obi110 for Fusion IP phone? I just signed up their service but don't know how to enable it with my Obi 110 device.
thanks so much
Leozou:
Still on? I didn't noticed your post since now. I checked Obi device setting as below.
Service Provider Proxy Server: smart.0038.net
Service Provider Proxy Server Port: 5060
Outbound Proxy Server: smart.0038.net
User Name: ######## 8 digit SIP account number
Password: ######## SIP account password
URI: ########@smart.0038.net
^^^^^^^ put 8 digit SIP account number
Navigation
[0] Message Index
[*] Previous page