Callcentric, OBI110 and SRV servers, can not get it to work!
jimates:
the NoRegNoCall is unchekced by default. Since I have to reset my device every time I attempt to reconfigure CC it was unchecked.
Not only do I have to reset it, I have to delete it from my account and add it back in order to get Obitalk to communicate with it.
CoalMinerRetired:
Please report back on if/how you solved your reboot issue.
On an unrelated point, note that they are using only one of the DNS servers CC lists, and it's the second one in the CC list. I'll guess it's that way for a reason, but I skipped right over that and put in the two servers CC lists. No rebooting for almost four hours so far.
jimates:
OK, got my device set back up. I will wait some more before I try CC again.
CoalMinerRetired:
Quote from: jimates on October 28, 2012, 11:11:30 pm
OK, got my device set back up. I will wait some more before I try CC again.
I hear yuh. My device was up for 11 some hours and I decided to try an incoming call to one of the CC numbers. The call was clear enough, but after I hung up I noticed the lights on the Obi202 acting odd, and then the device rebooted.
I just don't trust my Obi202 with CC at all anymore, and actually using it to receive a call is like walking on eggshells, it's gonna break somewhere.
ProfTech:
The second server in CC list will not likely work if you have X_DnsSrvAutoPrefix checked.
Returns zero addresses
E:\>dig +ignore @216.231.41.2 _sip._udp.srv.callcentric.com
; <<>> DiG 9.3.2 <<>> +ignore @216.231.41.2 _sip._udp.srv.callcentric.com
; (1 server found)
;; global options: printcmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 1415
;; flags: qr rd ra; QUERY: 1, ANSWER: 0, AUTHORITY: 0, ADDITIONAL: 0
;; QUESTION SECTION:
;_sip._udp.srv.callcentric.com. IN A
;; Query time: 156 msec
;; SERVER: 216.231.41.2#53(216.231.41.2)
;; WHEN: Mon Oct 29 11:00:40 2012
;; MSG SIZE rcvd: 47
Also, in answer to jimates; I wasn't sure if you reset your box to factory defaults or not but as far as I can tell, anytime you reset it to defaults you must re-register the unit on Obitalk using the **5 thing and start completely over. That is one of the reasons I have stayed away from using the portal so far. I have an Obi 100 in India that I use it with but the configuration is very plain vanilla.
Navigation
[0] Message Index
[#] Next page
[*] Previous page