GV on Obi
QBZappy:
garretn,
What is the model name/model of the router?
garretn:
I use a Smoothwall server I don't have a hardware router.
QBZappy:
I don't know if this is similar to your version. It might give you some ideas. (I considered at one time to use Smoothwall)
Read down to this section. It might help.
Configuring the SIP Proxy
http://www.scribd.com/doc/88286875/46/Configuring-the-SIP-Proxy
"Select to run SIP proxy service in transparent mode."
garretn:
I'm Not sure if this is the exact same version but close enough. I configured the SIP Proxy and it still wont connect.
Just to be clear it appears the only port I have to forward on the OBI is port 10000?
I have used Smoothwall for years and love it. Not that it matters but I currently use Vonage for my phone service and it seems to work just fine with my firewall.
My ISP shouldn't be blocking anything since this is a business account with a static IP address.
Thank you for the help I suppose I will give support a call and see if they have any ideas on what to do next.
QBZappy:
garretn,
Here are two references regarding ports to forward in the OBi FAQ which might be of interest:
http://www.obihai.com/FAQ.html
I cannot add my device to OBiTALK after dialing **5 xxxx
Make sure the firmware is up to date. To check, pick up the phone connected to the OBi and dial ***6.
1. Have you been able to do **9 222 222 222
2. Is the power light blinking green or steady green (check your IP address) . fix it by making sure it is connected to a router, not modem, and Ethernet cable snuggly fit, check the router Ethernet light, is it blinking?
3. Are you using Westell or other router that blocks some ports?
If yes, here is how to configure the router to allow this **5 process to go through.
Allow Outgoing:
TCP Ports: 6800, 5222, 5223
UDP Ports: 5060, 5061, 10000 to 11000, 16600 to 16998, 19305
Allow Incoming on UDP Port: 10000
What ports should I keep open on my router/firewall?
In order for your OBi to be able to send packets w/o interruption, please configure your router as follows:
Allow Outgoing:
TCP Ports: 6800, 5222, 5223
UDP Ports: 5060, 5061, 10000 to 11000, 16600 to 16998, 19305
Allow Incoming on UDP Port: 10000
Navigation
[0] Message Index
[#] Next page
[*] Previous page