Pulse dialing
AndroidsOfTara:
Quote from: jdoff on April 24, 2011, 08:32:35 pm
I just received a Dialgizmo this weekend, and can confirm that it works great with my OBi100 (and I assume the OBi110 as well). It's a slick device, and the company is responsive. If you do order one, tell them Josh sent you. :)
Thanks for the info!
AndroidsOfTara:
Quote from: jdoff on April 24, 2011, 08:32:35 pm
I just received a Dialgizmo this weekend, and can confirm that it works great with my OBi100
Mine just showed up this morning and is working, but I have a problem perhaps you can help me solve.
I am having problems dialing numbers containing the digits 8, 9 and 0. I've tried it on two different rotary phones which work perfectly on my POTS line.
I believe the problem is due to the time it takes to dial those numbers and return to a stop. I think the OBi is detecting silence between the tones generated by the Dialgizmo and timing out.
Any suggestions?
jimates:
It may be taking longer than 2 seconds for those digits to be delivered to the Obi. The Obi waits 2 seconds for the next digit entry. If no entry is made before 2 seconds, it times out and processes the number through the digit map.
If your second or third digit entry takes longer than 2 seconds the Obi is going to process the # as a speed dial entry and deliver the call (if you have speed dials occupying those places).
I am pretty sure you can increase the timeout. RonR will probably come along and tell you how before I find it.
AndroidsOfTara:
Quote from: jimates on May 14, 2011, 10:29:56 am
I am pretty sure you can increase the timeout. RonR will probably come along and tell you how before I find it.
Thanks. I've looked in the phone port settings and don't see anything related to time between touch tones.
I have been able to successfully make a couple of calls, but I have to be extremely fast getting that next high digit dialed!
MichiganTelephone:
Try this: In your phone port DigitMap, look for this:
|[1-9]|[1-9][0-9]|
Try adding S4 after each of those mappings (for a four second timeout, you can change the 4 if you want more time):
|[1-9]S4|[1-9][0-9]S4|
See if that helps.
Navigation
[0] Message Index
[#] Next page
[*] Previous page