PSTN forwarding using Obi110

(1/2) > >>

Letzmailpatel:
Hi

I have Obi110 and would like to do the below configuration and need help.

SP1 - setup GV
PSTN  - verizon landline or any other analog line

I would like to people to call my landline and have that connected to Obi110 and ring through SP1 or its forwarding number. 

example
landline = 9999999999
GV on SP1 = 111111111


if Tom calls 99999999999  it should ring on 11111111111

Is this something pratical or i'm in a lala land.  Any feeback would be appericated

jimates:
You will need a second service on sp2 that you will use to forward the call to GV. You can use the GV service to forward the call but when GV gets a call from itself it goes to your voicemail IVR instead of being processed like other calls.
You can get a free GV number for the second service, unless you were going to use that trunk for another service.

Physical Interfaces -> LINE -> InboundCallRoute =    sp2(11111111111)

Frankfone:
Thank you. Your solution worked perfect for me also.

Gradius:
Hi,

I did this and works, however I can't see who is calling (Call ID), the call id is working fine as I can see that from Web GUI, but not on forwarded phone.

I'm forwarding my Line (PSTN) calls to VoIP (my mobile phone).

Gradius:
Forgot to mention, is taking 15~16 seconds to ring my mobile (after 1st tone call from other phone to line).

Is that normal?  Is possible to speed up this thing?

Navigation

[0] Message Index

[#] Next page