Newbie questions regarding Obi110 setup ? Please help !
Suraj:
After long time, I bought obihai110 and I need help in achieving this ? I am going to use callcentric and rynga for this service.
1. I want to receive calls from other callcentric users
2. Some other people using their SPA-3102 Adapter (callcentric) called to my callcentric and routed to the rynga to dial numbers to other locations ?
For your information, I am using Obi110 and rest using SPA-3102.
Thanks a lot in advance.
ianobi:
Suraj,
Welcome to the forum :)
Your aims can be achieved, but let us get the basics working first!
First decide which service you wish to be your Primary Line – pick the one that you will make most outgoing calls on. Also decide which service (if any) that you will use for emergency calls (911).
Create your account, then add your Obi110 to the account (see quick start guide). Configure Callcentric (there is an easy default set up for Callcentric). Configure Rynga.
Check that you can make normal calls into and out of both service providers. Then post here again with the following information:
Phone Port Primary Line.
ITSP Profile A DigitMap.
ITSP Profile B DigitMap.
Then we can add the finishing touches to allow others to call in via Callcentric and out on Rynga.
Suraj:
Thanks a lot for your reply, it's really appreciated that you are guiding us from the start. i was using SPA-3102 but now slowly later they will be upgrade to Obihai 110.
Here is my setup:
SP1 : Callcentric
SP2 (Optional) : Rynga
Both of them are registered now as shown on the system and I can also receive a call from my callcentric using SP1. I want to receive calls from callcentric and want to use rynga only for the gateway. For example, if somebody called to the callcentric it divert it to the dailtone of Rynga something like that. For depth, if possible i want to dial and receive on one callcentric account and other used only to get the dial tone of rynga as in some of the country they blocked the rynga not callcentric so they dial callcentric first and get the dial tone from rynga.
No idea how to do the next step. thanks a lot in advance.
Quote from: ianobi on November 10, 2012, 03:18:40 am
Suraj,
Welcome to the forum :)
Your aims can be achieved, but let us get the basics working first!
First decide which service you wish to be your Primary Line – pick the one that you will make most outgoing calls on. Also decide which service (if any) that you will use for emergency calls (911).
Create your account, then add your Obi110 to the account (see quick start guide). Configure Callcentric (there is an easy default set up for Callcentric). Configure Rynga.
Check that you can make normal calls into and out of both service providers. Then post here again with the following information:
Phone Port Primary Line.
ITSP Profile A DigitMap.
ITSP Profile B DigitMap.
Then we can add the finishing touches to allow others to call in via Callcentric and out on Rynga.
Suraj:
Phone Port Primary Line : where is this option ? Sorry I couldn't find it.
ITSP Profile A DigitMap : (*xx.|**275*x.|[3469]11|1xxxxxxxxxx|<1>[2-9]xxxxxxxxx|011xx.|xx.|(Mipd)|[^*#]@@.)
ITSP Profile B DigitMap : (1xxxxxxxxxx|<1>[2-9]xxxxxxxxx|011xx.|xx.|(Mipd)|[^*#]@@.)
For your information I got Obihai 110 but don't have PSTN line.
ianobi:
Have a read through this post:
http://www.obitalk.com/forum/index.php?topic=4541.msg29775#msg29775
It concerns setting up "Trusted Callers". When numbers that you put in your Trusted Callers list call your Callcentric number they will reach your Auto Attendant. Option 2 allows them to dial out from your OBi the same as you can from the phone connected to the OBi.
If you have to dial **1 to use Rynga, then so will they. You can test this after setting it up by putting your cell phone in the Trusted Callers list and seeing how it works.
I have to sign off for today, but I will be back tomorrow to see how you get on. Good luck!
Navigation
[0] Message Index
[#] Next page