December 16, 2017, 06:50:08 am *
Welcome, Guest. Please login or register.
News:
 
   Forum Home   Search Login Register OBiTALK  
Pages: [1]
  Print  
Author Topic: Obi202: Manual configure IP, DNS, GV, SIP server  (Read 9821 times)
0815dela
Newbie
*
Posts: 3


« on: November 10, 2012, 09:06:38 pm »

Trying to configure GV on SP1 and then use SP2 as SIP server so I can connect a sip phone to GV via Obi.

Having some trouble with this.
1. Where can a static IP be set in bridge mode? There does not seem to be an option. Do I have to set a dhcp reservation on my router via MAC address?

2. SP1 (GV) Service Status says "Resolving DNS"

3. SIP Phone cannot connect

Here is my config: http://www.filedropper.com/config_8
Logged
QBZappy
Hero Member & Beta Tester
*****
Posts: 2322



« Reply #1 on: November 11, 2012, 02:45:33 pm »

Trying to configure GV on SP1 and then use SP2 as SIP server so I can connect a sip phone to GV via Obi.

1. Where can a static IP be set in bridge mode? There does not seem to be an option. Do I have to set a dhcp reservation on my router via MAC address?

2. SP1 (GV) Service Status says "Resolving DNS"

3. SIP Phone cannot connect

1. "dhcp reservation on my router via MAC address", should work.

2. In bridge mode I don't think you need a DNS entry in the OBi. Your router should provide for this.

3. From your PDF I see, {SP2@1001@local_client} I think "local_client" should be ip of the sip client (phone).
« Last Edit: November 11, 2012, 05:10:33 pm by QBZappy » Logged

Owner of the 1st OBi110/100 units in service in Canada & South America. 1st OBi202 on my street. 1st OBi1032 in Montreal.
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC