Release 1.2 Now Available - Please Update Your OBi
JohnLennon:
Do we know what the 04/07 update fixes?
Going forward it would be nice to have a list of changes in every firmware release.
RonR:
JohnLennon,
Good luck with that request. Obihai won't even respond to a specific question regarding a specific problem, so I wouldn't hold my breath for a comprehensive list of problems:
http://www.obitalk.com/forum/index.php?topic=477.msg3823#new
plugger2:
Quote from: JohnLennon on April 11, 2011, 08:38:54 am
Do we know what the 04/07 update fixes?
Going forward it would be nice to have a list of changes in every firmware release.
They have recently added to the DL webpage a list of fixes included in the latest fw release (which is very welcome -- I hope this is the new policy):
http://www.obitalk.com/forum/index.php?topic=9.0
GizmoChicken:
Quote from: ShermanObi on March 22, 2011, 11:49:36 pm
Additional Features in 1.2
* IP & URL Dialing with Target Service Distinction
- IP Address and/or URL dialing is supported.
- Calls to specified IP addresses and/or URLs can be routed to a target service.
- For example: SP1(sip.xyz.com:5081) or SP2(192.168.15.118)
I don't understand the need for the "SP1" and "SP2" preceding the target service. As posted by another, this seems to imply that either "SP1" or "SP2" must be a SIP service. That is, gateways won't work if BOTH "SP1" or "SP2" are attached to Google Voice accounts. I can't understand why this limitation has been imposed.
I suppose I could sort of understand why a voice gateway may require setting a "SIP signalling protocol" and why it might be easier to do that by referring to "ITSP Profile A" or "ITSP Profile B" rather that specifying the protocol (and/or other parameters) for each voice gateway. But IF that's the case, why not adjust your code so that something like the following configurations could be used: ITSP-A(sip.xyz.com:5081) or ITSP-B(192.168.15.118).
Navigation
[0] Message Index
[*] Previous page