OBi Expert Configuration (Introduction)
jimates:
To make changes using the portal or directly; if either the default box or the Obitalk box is checked, you must first remove the check from both boxes and then make your changes.
ibotalk:
thanks
i had noted that removing the check from the obitalk transfers the check to the default
but it hadnt occurred to me that i could then remoe the check from the default and thus allow edits!
ShermanObi:
Added to the original topic post:
- More explicit language about un-checking the OBiTALK Settings and Device Default check boxes.
- Image showing the same.
guyinsb:
I am using a MacBook running Snow Leopard, and use FireFox (v12.0).
When attempting to use OBi Expert Configuration, when I uncheck the "OBiTalk" box,
the other box does not get an automatic check. As a result, I can not uncheck both
boxes, and as a result can not change the value for the associated parameter.
Everything works fine with Safari and Camino.
[Mod note: A bug has been entered for this issue. Thank you for your support - Obihai Technology]
Clive:
Quote from: Dale on October 26, 2011, 01:30:57 pm
But, take the "AddressingType" setting for example... in the direct access UI there are two choices:
Static
DHCP
For this parameter, there is nowhere in the ObiExpert UI that I have found where this choice can be made. It now displays the value, but no change can be made.
I've just started using obi110 with firmware 1.3 and can change the addressing value using the obiexpert web ui by the double untick 'feature'.
Must say, initial impressions of this device are positive. Have been using Linksys in the past but their new devices are really buggy so it's a refreshing change to see some voip kit that is actually modern in concept and design.
Another plus is you don't need asbestos gloves to pick it up when it's running ;), cool man ::)
Navigation
[0] Message Index
[#] Next page
[*] Previous page