How to get my landline phone calls to obi202
ianobi:
Some users report that faxing is possible with OBi110 using codec G711 and keeping the fax speeds slow, but most think it's unreliable at best.
Using an OBi202 and OBi110 behind the same router needs some thought. Physically you just plug both into separate router ports and add both devices to your account. Then you have to decide what you wish to happen - you have a total of 3 phone ports, 6 service providers and a PSTN line. Do you want all services to call all phones? All phones to access all services? Lots of questions!
This post may give you an idea of what is involved, although in this case the two OBIs were in different locations:
http://www.obitalk.com/forum/index.php?topic=1599.msg10162#msg10162
The basic idea is that you forward calls between the two OBi devices using the OBiTALK network. This would mean that dialling 911 from the OBi202 would have to go via the OBiTALK network to get to the OBi110 and out to PSTN.
Ostracus:
Quote from: ianobi on November 19, 2012, 05:55:15 am
It is possible to have both OBi devices behind the same router and have them forward calls to each other. That does seem a bit over complicated and may be not as secure a system as needed for 911.
Noted on the 911, but RonR did help me set up forking from an Obi110 to an Obi202, which is very simple (except for the AA which is solved by putting on different accounts).
Navigation
[0] Message Index
[*] Previous page