Dial Plan for forcing international calls via SP2

(1/4) > >>

soccerfan:
New, inexperienced user (my first post).
I have set up my obi110 SP1 for Google Voice and SP2 for voip.ms.
I would like all international calls with prefix 011
(or 044 which forces voip.ms to use their premium routing)
to be placed by SP2 by default.

Is there any simpler way than prefixing **2 every time?
Thanks,
Edit: The various destination numbers after 011 (or 044) are between 10 and 15 digits long.

RonR:
Assuming SP1/ITSPA is Google Voice and SP2/ITSPB is VoIP:

To make international calling automatically use SP2 with the primary line being SP1, it should only be necessary to modify the ITSPA DigitMap rule for international dialing [<**2>011xx.].

Suggested configuration:

Code:

ITSPA DigitMap:
(1xxxxxxxxxxS0|<1>[2-9]xxxxxxxxxS0|<1aaa>xxxxxxxS4|<**2>011xx.|xx.)


aaa = your local area code

soccerfan:
Thanks RonR. This is exactly what I was looking for  :). One quick question though:
Can your suggested configuration also be entered from the obitalk.com web portal, and if so, how?
I have the latest software upgrade from today. Thanks again.

RonR:
I don't use the OBiTALK Web Portal, so I can't answer that one.  If you do any configuration outside the OBiTALK Web Portal, it's usually a good idea to diable Provisioning in your OBi so the Web Portal doesn't overwrite your custom settings everytime you reboot.

jimates:
@ soccerfan

As of today, you can do that with the Expert Settings from the Obitalk Portal. Prior to the Expert Settings you could only do it from the web interface. This makes remote configuration possible and a very nice feature.

Navigation

[0] Message Index

[#] Next page