Using CSipSimple With OBi
cpetro:
I have all the codecs selected in CSipSimple, but none are specifically G711. The call info shows PCMU 8khz while on the 'dead air' call. That's the same codec info shown on an incoming GV call forked to my Android from the Obi.
QBZappy:
cpetro,
Can you get the sip2sip test numbers referenced above?
azrobert:
It works for me using WiFi.
I currently don't have a data plan for my Android, so I can't test 3G.
Maybe you should try the original method of routing thru Sip2Sip to your router.
cpetro:
Thanks for all your help QBZappy and azrobert!
I'm able to call the test numbers from the CSipSimple dialpad without any problems. The call info shows the same PCMU codec and the sound quality is good to go.
Decided I'm going to take your advice and go through sip2sip again. My data plan is unlimited and very fast so I pretty much never turn my wifi chip on to save battery. After I get calls working the way I want, I'm going to work on switching to TCP keepalives to save a little more. ;D
azrobert:
Just curious.
Has anyone got my method of bypassing Sip2Sip to work?
Navigation
[0] Message Index
[#] Next page
[*] Previous page