Spoofing Solved

<< < (3/3)

QBZappy:
Tiger,

It did not ring until after 7 rings, making it of no use. The sip uri method should pass CID without the ";ui=$1 part" from one sip provider to another sip provider. Note that GV is not a sip provider.

azrobert:
My limited testing showed the "ui=$1" either worked perfectly or was rejected depending on the service provider.
I came up with 2 solutions when the calls are rejected. Both are not ideal, but I believe they work.

Solution 1
PBXes accepts calls with "ui=$1"
Forward the call to PBXes.org, then within PBXes forward the call to freephoneline.
Get a free account at PBXes.org.
Define an extension like 0001.
Under Device Option change the Dial option to "SIP/5145551212@voip.freephoneline.ca"
The external extension number become YourPBXesID-0001.
Change OBi X_InboundCallRoute to {sp2(YourPBXesID-0001@pbxes.org;ui=$1),ph}.

Solution 2
Change OBi X_InboundCallRoute to the default.
Get a free IPKall phone number.
Config IPKall to SIP URI = 5145551212@voip.freephoneline.ca
Add the IPKall number to your GoogleVoice Settings.
In GoogleVoice Settings forward all calls to GoogleChat and IPKall.
In the past IPKall had problems delivering the correct CID.
My IPKall number seems to be fixed.

Juste:
Hello,

Sorry for bringing such an old topic back to life.

Did anyone manage to have FPL pass the Caller ID ?

I tried to follow the instructions above with no luck.

Is it possible at all ?

Thanks,

Azouz:
Yes. it's possible. In the passed I used callwithus.com to pass the CID and it worked fine. In the last month it stopped working.
You need a Callcentric account (Free)
SP2 = Anveo (yours may differ)
SP2 ===> X_InboundCallRoute ===> {sp2(17772650000@in.callcentric.com;ui=$1)}

17772650000 is my callcentric number.
From here, you can forward the call using callcentric built in call forwarding feature (you don't to set up Callcentric in OBI) . Or you can forward using any SPx in your OBI (in this case you need to set up callcentric in OBI).

Juste:
Quote from: Azouz on September 04, 2014, 12:50:42 pm

Yes. it's possible. In the passed I used callwithus.com to pass the CID and it worked fine. In the last month it stopped working.
You need a Callcentric account (Free)
SP2 = Anveo (yours may differ)
SP2 ===> X_InboundCallRoute ===> {sp2(17772650000@in.callcentric.com;ui=$1)}

17772650000 is my callcentric number.
From here, you can forward the call using callcentric built in call forwarding feature (you don't to set up Callcentric in OBI) . Or you can forward using any SPx in your OBI (in this case you need to set up callcentric in OBI).



Thanks, but my question only meant Freephoneline.

I know that other providers can very well pass Caller ID, for example Voip.ms. As far as I know, all of them are PAYG.

However, I would very much like to know how to get FPL to do it, for obvious reasons.

Navigation

[0] Message Index

[*] Previous page