“stutter” dial tone for Google Voice message indication
RonR:
Quote from: jbrune on September 10, 2011, 09:04:13 am
I am having the same problem, but am having a hard time understanding some of these instructions. First, when I go into ObiExpert Configuration menu then to SP1 Service, there is no "Message Waiting" option, only MWIEnable and X_VMIEnable.
The MessageWaiting option is only available in the OBi itself. It's not present in OBiExpert. You will have to log into the OBi itself to manipulate it.
VulcanTourist:
What RonR means, if you need clarification, is to use the built-in Web interface of the device itself and enter its IP address into the browser, as you would to manage your router. How do you know its IP address, you ask? I can't recall how you determine it, if it's not the default; for me it doesn't appear in my full network map (in Windows 7), even though my HDHomerun device does, nor does it appear in Devices and Printers. I guess I'd have to log into my router and find it in the connected devices there. I find it odd that it doesn't appear in the full network map.
QBZappy:
Dialing ***1 on the phone attached to the OBi will give you the ip of the OBi.
RonR:
You can determine the OBi's IP address by dialing ***1. There is no default IP address. It's different for everyone as it's normally issued by your router using DHCP (Dynamic Host Configuration Protocol).
jbrune:
Thanks so much. I got the IP address no problem, but entered it into my browser and did not do anything. Where do I find the built-in Web interface of the device itself so that I can then use the IP address and uncheck the box?
Thanks again,
Jeff
Navigation
[0] Message Index
[#] Next page
[*] Previous page