FW 1.2, SIP register failed. Works Now.

(1/2) > >>

xray:
After updated to firmware 1.2.0 (Build: 2101), I am not able to register to sip service (local phone).  
It seems registered for the first couple minutes right after the flash but never tested.  
Now it shows "Register Failed: No Response From Server".   My Nokia cell phone is still connecting to local phone fine (using the same account).  

I tried reset OBi110, then re-enter the sp2 registration setting manually, failed.  I tried restore the saved configuration and just re-enter the password , failed.  
It's connected to GV fine but not SIP.  

Can I download and try the previous firmware?  

xray:
After couple hours, it just works again.   ???   

Wanton_Funn:
Same thing happening here, except it still won't register.  Worked fine before the upgrade.

I'm trying to connect to voip.ms.  Is there any way to revert to the earlier firmware?

Wanton_Funn:
Ok, some more info:
I tried enabling a STUN server, no luck.  Also tried changing the retry interval of registration, no luck.  Tried checking my router to see if there are any VOIP settings, didn't find any.

Don't understand this, it was working fine before I updated to 1.2.1.

Wanton_Funn:
Ok, might be an issue with my provider (voip.ms).  I was able to change the POP and registration now succeeds (at least for now).

Still, it's interesting that my other soft phones don't have any issue registering to that original POP.

Navigation

[0] Message Index

[#] Next page