OBi110 and Callwaiting CallID on Incoming Calls while on the line
infin8loop:
I use a Vtech 3 Handset Cordless System Model# IA5878 which is probably at least 5 years old, probably older, connected to an OBi110 (1.3.0 Build: 2719). I have GV on SP1 and voip.ms on SP2. I get call waiting callerid shown on the handsets for an inbound call to GV or my voip.ms DID (ported from AT&T for $10 during the "kick callcentric while they're down sale") when a call is already in progress.
The OBi110 Phone Port CallerIDEnable and CallWaitingCallerIDEnable are both checked (default values).
I see the call waiting callerid in the OBi110 call history log as well. For those of you not getting call waiting callerid displayed on your phone handset, what does your OBi call history show for the call?
Lavarock7:
Quote from: zapattack on December 03, 2012, 04:47:08 pm
The reply from Obi ignored the real problem.
The problem is not that caller-id doesn't work,
Call Waiting Caller-Id doesn't work, a totally different function.
If it works when the phone is On-hook, then the Obi is not sending compatible Off-hook signals.
Not all callerID units display the callerID of an inbound call when a call is already in progress.
Wikipedia discusses that:
"In 1995, Bellcore released another type of modulation similar to Bell 202 in which it became possible to transmit caller ID information and even provide call-disposition options while the user was already on the telephone. This service became known in some markets as call waiting ID, or (when it was combined with call-disposition options), Call Waiting Deluxe; it is technically referred to as Analog Display Services Interface. "Call Waiting Deluxe" is the Bellcore (now Telcordia Technologies) term for Type II caller ID with Disposition Options."
zapattack:
Then it appears the Obi does not support the original CWCID, only a newer version?
My BellSouth labled Call Waiting Caller ID System does not register that type of Obi call, only regular by which I mean it worked with my LinkSys ATA.
fred11:
I bought a bellsouth Cl-43 (ebay $10) and put it ahead of my panasonic dect phones on my obi110 phone output. CID for a waiting call works fine. Of course the CI-43 is located ahead of the dect base unit so the remote phones don't display the CWCID, but the Cl-43
saves everything and I can call back after completing the first call. I don't like being put on hold for an interrupting call anyway, so I don't see this as a problem.
Navigation
[0] Message Index
[*] Previous page