dialing #211# from remote obi
denon321:
Thanks a lot to all :QBzappy and Ianobi.
I will test both solutions later at home and report,as i am at work.
regards
denon321:
Hi everyone;
I CANNOT get this to work:
I have tried the following on my LINE port digitmap without success:
(<#>211<#>|xxxxxxxS4|1xxxxxxxxxx|xx.) results in: the number dialed #211 is invalid ;meaning the second # is NOT dialed
(<#>211<#>|xxxxxxxS4|1xxxxxxxxxx|xx.) results in: the number dialed #211 is invalid ;meaning the second # is NOT dialed
(<#>211<#>|1xxxxxxxxxx|<1>[2-9]xxxxxxxxx|011xx.|xx.|(Mipd)|[^*#]@@.)result: line engaged
(#xxx#|xxxxxxxS4|1xxxxxxxxxx|xx.) result:line engaged
{([1-9]x?*(Mpli)):pp},{(<#:>|911):li},{**0:aa},{***:aa2},{(<**1:>(Msp1)):sp1},{(<**2:>(Msp2)):sp2},{(<**8:>(Mli)):li},{(<**9:>(Mpp)):pp},{(Mpli):pli},{<#>211<#>}
same as reported before
RESUMING scenario:
I am using Obi110 A to dial thru "remote"obi 110 B's LINE PORT the following sequence #211#
where is the digimap edited in OBI A ? or OBI B?
sorry for my incompetence and thanks in advance for the help
ianobi:
Looks like one of our classic misunderstandings :-[
With the rule <#>211<#> I was trying to say that if you dial 211 the digitMap will prepend a # and append a # resulting in #211#
Looks like what you really need is the rule #211<#> If #211 is dialled, then a # will be appended resulting in #211#
Line Port DigitMap should be:
(#211<#>|xxxxxxxS4|1xxxxxxxxxx|xx.)
denon321:
Thanks again;trying then report
denon321:
good morning again Ianobi,I tried on obi A and got a busy tone (tried several times) then tried on obi B again and busy tone there must be something I am doing wrong here digitmap is exactly as written by you
(#211<#>|xxxxxxxS4|1xxxxxxxxxx|xx.)
inbound route left as ph
Navigation
[0] Message Index
[#] Next page
[*] Previous page