Call forward on Busy not working ...
hwittenb:
Have you tried disabling CallWaitingEnable on the PhonePort?
PhonePort-->CallingFeatures-->CallWaitingEnable
QBZappy:
You can use GTALK/CHAT (using a different acct ex name@gmail.com in contact list) to call your OBi, and a cell phone. This will make occupy both voice channels. You will need to make a 3rd call using either another GTALK/CHAT or cell phone. I'm not certain if you can make 2 GTALK/CHAT calls at the same time, however you can have two instances running with two accts. I've used it before.
Google Talk: Run Multiple Instances or Log In as Multiple Users
http://www.tech-recipes.com/rx/975/google-talk-run-multiple-instances-or-login-as-multiple-users/
Run Google Talk with the following switch: /nomutex.
If you installed Google Talk to the default location, you can easily create a shortcut to this setting.
1. Right-click on the desktop.
2. Select New.
3. Select Shortcut.
4. Paste this into the text box:
"c:\program files\google\google talk\googletalk.exe" /nomutex
maihoodon:
Thank you guys, disabling Callwaiting on phone port did the magic. Below is what is happening :
1. My GV# is setup to forward calls to Callcentric# and my cell phone
2. GV is setup as SP1, and Callcentric is setup as SP2 on my OBI-100
3. My GV# is called, the cordless phone attached to OBI (SP2 Callcentric) and my cell ring
4. I pick-up call at cordless phone
5. While on this call, GV# is called again, as per GV rules call is forwarded to Callcentric but doesn't forward call to cell phone this time
6. As I have setup "call forward on busy" on SP2(Callcentric), this call is forwarded by OBI to my cell via SP1 (GV).
7. So my cell phone rings as expected
But there is still one issue with this, on my cell I see my GV# as CALLER ID rather than the original caller id. Is there any way to get around this as well.
Thanks a lot...
Navigation
[0] Message Index
[*] Previous page