Help please OBI110 - newbie

<< < (2/2)

livelong:
Thanks ionobi, I'm away from my home, will try and let you know how it goes.

Have a great day!!
LL

livelong:
Thanks for all your help so far..have some more questions ..please see below

My set up is as follows

My pstn line(vonage) is connected to obhi110 which is set as primary line
and sp1 is set up as GV1

All the outgoing calls are routed thru the pstn line both from the obhi110
connected phone and OBiON. All incoming calls to both pstn and GV1 rings the
obhi110 connected phone

1) I want all unattended GV1 calls go to google voice mail (currently these also going to vonage voice mail).

2) When I call from my cell phone to GV1 it goes to AA this is good..but when I use OBiON it needs to go to AA too...

Thanks
LL

Rick:
It's likely that Vonage is picking up in under 25 seconds. Set it for longer and Google Voice will take the message.

ianobi:
Quote

2) When I call from my cell phone to GV1 it goes to AA this is good..but when I use OBiON it needs to go to AA too...

Add this rule: {(Mcot)>**0:aa}

So now you should have this:

Voice Services -> OBiTALK Service -> InboundCallRoute:
{(Mcot)>(Mli):li},{(Mcot)>(<**1:>(Msp1)):sp1},{(Mcot)>(<**2:>(Msp2)):sp2},{(Mcot)>(<**8:>(Mli)):li},{(Mcot)>(<**9:>(Mpp)):pp}},{(Mcot)>**0:aa},{(Mcot):aa},{ph}

Now, if you dial **0 from OBiON you should get the Auto Attendant.

Navigation

[0] Message Index

[*] Previous page