Really need help with OBI 110 installation!!
ineedhelp:
I bought the OBI 110 thru amazon.com. I am having trouble adding the device. I have a 2wire modem. The green light on OBI 110 is blinking green. Every time I dialed the given value I got a respond saying my device has been add to the server but I got no respond on the computer. I tried everything but could not see what the problem is. People, I need your help.. :(
hwittenb:
To start with the basics tell us how you are setup. Does your 2-wire brand modem have a router with lan ports to connect several devices or just a single internet connection? Does your OBi110 get an ip address from the 2-wire modem? This is the first requirement and you can check this by dialing ***4 when you pickup the phone. If you get an ip address you should be able to call the OBi echo test by dialing **9 222 222 222.
ineedhelp:
My router?( sorry if i wrote modem) does have multiple ethernet ports. I tried every port and 2 different cables. For some reason the device cannot get an IP on my modem.
hwittenb:
Quote from: ineedhelp on December 10, 2012, 04:31:25 pm
My router?( sorry if i wrote modem) does have multiple ethernet ports. I tried every port and 2 different cables. For some reason the device cannot get an IP on my modem.
Getting an ip address is the first step.
When you cable your powered OBi110 to your router, the OBi110, using the DHCP protocol, asks the router for an ip address. Is it possible your router has a Firewall or other setting enabled that is preventing the router from issuing the ip address. I presume you have your computer attached to the same router and it gets its ip address by DHCP.
When you pickup the phone and dial ***1 the voice says that your network address is not available and says DHCP is enabled?
What is your router's make and model number?
ineedhelp:
It say that the IP address is not available and DHCP is disabled. My modem model is 2wire 3600hgv. Thanks so much for your help.
Navigation
[0] Message Index
[#] Next page