Access Google voicemail over OBi via a VM key?

(1/2) > >>

wolfv:
I am using OBi100 with Panasonic KX-TG6511 base station and matching Panasonic KX-TGA652 handset.

The message alert message indicator on the hand set flashes after a new Google voicemail is recorded.  I can retrieve my Google VM if I dial the access number manually (PIN is not needed because OBi has my password to log into Google Voice).

Now I try to retrieve Google VM via Panasonic's VM key.  On the Panasonic, pressing the "VM" key is supposed to play the VM (I saved the VM access number on the handset).  But when I press the VM key, all I get is 15 seconds of silence followed by a busy signal.

Does anyone access google VM over OBi via VM key?

Thank you.

pc44:
Hi wolfv,

According to the user's manual for the Panasonic KX-TG6511 (located here), you should be able to configure the voicemail number on your phone.  On page 43 of the user's manual, it says you need to press the following:

{MENU} --> {#} {3} {3} {1}

Then, enter your access number.  In your case, it would be your GV number.

Hope it helps,
pc44

wolfv:
Quote from: pc44 on December 11, 2012, 12:15:31 pm

Hi wolfv,

According to the user's manual for the Panasonic KX-TG6511 (located here), you should be able to configure the voicemail number on your phone.  On page 43 of the user's manual, it says you need to press the following:

{MENU} --> {#} {3} {3} {1}

Then, enter your access number.  In your case, it would be your GV number.

Hope it helps,
pc44

Yes I did that before posting here.  I saved the VM access number on the handset.

QBZappy:
This might help.

The 'Voicemail Access' option
http://support.google.com/voice/bin/answer.py?hl=en&answer=117523

If you call your GV number, using one of the GV forwarding numbers, I think you should be getting the VM.

wolfv:
Thanks for you suggestions.  I tried again.  This description is more accurate than the one I post above:

When I press the VM key, I can hear the access number being dialed, then 10 seconds of silence, and then a busy signal.

When I manually dial the access number Google plays back the voicemail as it should.

Maybe there is some peculiar interaction between OBi and the Panasonic VM key.  Has any OBi-Panasonic user successfully retrieve voicemails with their VM key?  If not I can simply put the access number on speed dial.

Thank you.

Navigation

[0] Message Index

[#] Next page