Call history

<< < (2/2)

CoalMinerRetired:
QBZappy, I started using the Portal a month or two ago, so I suppose what I said in hindsight means since then. 

An FYI, when I started using the portal I had been used to the device IP-address access, and was also frustrated the call history wasn't showing anywhere.

carl:
QBZappy, that link will not work for me either.
My problem is following :
1. I can get to Obi 100, i just cannot log on because it is not clear to me which user name and passord to use there.
2. I can NOT get to Obi 202( which I actually need to do), seems like the IP address which I get through ***1 is wrong.
 Any idea?

MikeHObi:
By default, the OBI 202 will not allow connection to it's web server via the WAN port.  You need to go through the Auto Attended and turn it on.  Make sure your username and password for that website get setup with a secure password as soon as you do.

From the admin guide:
Quote

When the device is operating in router mode (OBi202, OBi302 only), the built-in web server may be accessed from the LAN side or the WAN side. While access from the LAN side is always allowed, for security reasons, the access from the WAN side may be disabled by configuration. In fact, the WAN side access to the web server is disabled by default. You can enable this option on the device web page (from the LAN side), or by using the device configuration IVR (* * * 0 option 30) from an attached telephone.

carl:
Thanks. I just received a  similar message from obi customer support.  :)

Hortoristic:
default username and password are both "admin" - Although you would need port forwarding turned on for the OBI IP address, you should change password.

I have strong password; but I also access my OBI portal from any computer on internet.

Navigation

[0] Message Index

[*] Previous page