Offline after DHCP re-relase

<< < (2/2)

magicalbum:
I have a similar issue. My OBi110 works fine when I turn it on with the network up but it does not work when the network goes down or when I bring it up when the network is not ready. I need a way to either have it retry to connect at certain intervals or at least have the start up timeout be extended so that it will wait for the network to be ready. Please let me know if this is possible and how to do so.

JohnOR88:
Symptoms: Obi110 telephone connection LED (3rd from left) turns off.  Cannot connect to Obi device via the web browser.

Hopeful Solution:  I just found yesterday that the static IP I assigned to my Obi110 was in the range my router uses for DHCP.  I change the range the router uses so the Obi IP is not in it.  So far, the Obi has remained connected.

LeoKing:
I set the static IP's for my 2 OBi110's on the router (in its DHCP server range) using their MAC's. I've never had problems with this setup.

Navigation

[0] Message Index

[*] Previous page