Newbi with OBI110 International Calls and GV routing problem

<< < (3/3)

Larva:
Quote from: ianobi on December 27, 2012, 11:27:31 pm

In the example you posted the OBi110 seems to be acting correctly and is sending eleven digits starting with "1" to line. I note that the state is "peer-ringing". Is this a call that failed and got the message saying a "1" is required?

I wonder if the "1" is being sent to line before the PSTN telco is ready to receive it. Try this change:

Physical Interfaces -> LINE Port -> DialDelay: 1000

This will increase the delay from the default half a second (500 default) to one second (1000). This gives a little more time for the telco to present dial tone before the OBi sends the first digit to line.


thanks so mush that worked perfect,  made then calls an non of it present a error.

i have one more question, when i recive a call incoming from G/V No. I can see the phone number (CID) , but when goes trought the pstn it does not shows the telephone number.

how can I fix that? i dont have CID service on my landline but few post above a user tried to help but the code didn't work.

Navigation

[0] Message Index

[*] Previous page