OBi100 v1.3.0 (Build: 2765) crashes all the time accepting new calls

(1/2) > >>

OZOi:
With the latest firmware OBi100 crashes all the time it receives incoming calls.

Participants:
1. OBi100, firmware v1.3.0 (Build: 2765)
2. SIP switch - FreeSWITCH (latest build)
3. Calling SIP client - CSipSimple, r2063

Test call:
14:10:29 - CSS (CSipSimple) makes call to OBi100
14:10:40 - OBi100 accepts the call and dies immediately, going to reboot
14:10:48 - CSS ends the call from its side

Here is log, collected by FreeSWITCH during that session: http://pastebin.com/Yzx06kXE

Crash / reboot is happening all the time.

Please help to fix the problem.

CoalMinerRetired:
> Please help to fix the problem.
You need to contact Obi support to address this.

OZOi:
I've posted description of the problem here in a hope, that OBi support reads this forum and cares about serious issues like crash or instant reboot while OBi ATA is accepting a call. I'm ready to provide any details and to help to repeat the test on their side reproduce the problem.

CoalMinerRetired:
It doesn't work that way. You have 50+ posts you should know that.

Start here: http://www.obihai.com/supportTicketForm.php

ProfTech:
I'm not sure if what I saw could be related to your issue or not but I updated (1) Obi 100 and (2) 110's on Friday and both of the 110's showed an "apparent" crash [uptime showed xxx but there was no reboot code] within a few hours. My 110 did it twice. So I saved the config and did a paper clip factory reset on the unit I have here. After putting the passwords back in I have only made one test call. Stayed online for 3 minutes with no issues. Will have to watch it for a few days. I already reported it to obi.

Navigation

[0] Message Index

[#] Next page