calling between Obi devices gets me to voice prompts first

<< < (2/2)

QBZappy:
archean,

The OBi is getting the configuration from the OBiTALK portal. It is over riding whatever you changed directly on the unit configuration. You need to decide if you want to make changes using the portal or directly on the unit. If you decide to use the unit to make changes then you need to disable the OBiTALk provisioning on the unit in order to make it stop replacing your modifications.
System Management
    Network Settings
    Auto Provisioning->ITSP Provisioning = disabled
                           ->OBiTalk Provisioning = disabled

If you want to make that change on the portal, you need to remove any check marks to the right of the OBiTALK Service Settings->InboundCallRoute. You will need to play with the check marks until they are both gone for the change to stick on the portal. (Device Default)   (OBiTALK Setting)

There are pros and cons of using either method.

Navigation

[0] Message Index

[*] Previous page