OBI202 - Unregistered Direct IP Dialing
ianobi:
Is the status of sp3 still "Registration Not Required"? Which is how it should be.
If you get fast busy after dialling **3, then there must be something more basic not right. Would you mind showing your Phone 1 DigitMap and Phone 1 OutboundCallRoute? Assuming phone 1 and 2 are the same regarding **3 operation.
N2VWZ:
Quote from: ianobi on January 10, 2013, 06:24:54 am
Is the status of sp3 still "Registration Not Required"? Which is how it should be.
If you get fast busy after dialling **3, then there must be something more basic not right. Would you mind showing your Phone 1 DigitMap and Phone 1 OutboundCallRoute? Assuming phone 1 and 2 are the same regarding **3 operation.
Status is still "Registration Not Required"
The Phone 1 & 2 DigitMap and OutboundCallRoute parameters are ObiHai 202 default with the exception of Phone 1 Digit map.
I modified the Phone 1 Digit map to invoke a secondary dial tone after dialing a service select code (**1, **2, **3, **9). I copied the string that I was using on my OB1100, so it's possible that the added string does not account for **3 and **4 codes which are not supported by the Obi100. This may be the reason for the busy signal.
I won't have equipment access until tonight. I will look at this tonight when I get home.
azrobert:
Quote from: N2VWZ on January 09, 2013, 03:35:05 pm
I'm IP dialing a Sipura box across town that is presently working with my Sipura box.
My working Sipura Dial in URL is: 444xxx@n2vwz.dyndns.org:5061
My expected Obi Dial in URL would be: 444xxx@n2vwz.dyndns.org:5060
If the OBi is calling the same device as the Sipura, shouldn't the OBi also call port 5061?
azrobert:
Reading more of your posts I'm getting confused, which isn't uncommon for me.
Does n2vwz.dyndns.org point to the WAN address of your OBi/Sipura or does it point to tha WAN address of the Sipura across town?
N2VWZ:
Quote from: azrobert on January 10, 2013, 01:27:48 pm
Quote from: N2VWZ on January 09, 2013, 03:35:05 pm
I'm IP dialing a Sipura box across town that is presently working with my Sipura box.
My working Sipura Dial in URL is: 444xxx@n2vwz.dyndns.org:5061
My expected Obi Dial in URL would be: 444xxx@n2vwz.dyndns.org:5060
If the OBi is calling the same device as the Sipura, shouldn't the OBi also call port 5061?
The url of the Sipura across town is 444xxx@wa2vcs.dyndns.org:5064 He can call my Sipura box on port 5061 or my OBi box on port 5060.
Navigation
[0] Message Index
[#] Next page
[*] Previous page