Hong Kong and China OBi Users Group （中港OBi用家论坛）
yhfung:
Modify the Ring Dection settings specifically for HK Telco Standards:
Physical Interface --> LINE port --> Ring Detection
Ring Frequency Min: 10
Ring Frequency Max: 100
Ring Validation Time: 256 ms
Ring Indication Delay: 512 ms ( same to default )
Ring Timeout: 640 ms
Ring Threshold: 13.5-16.5 Vrms
Ringer Impedance: High (Normal) ( same to default )
Reference: http://www.obitalk.com/forum/index.php?topic=396.0
obi-support2:
I have read reports from HK users that dialing 7 digit on PSTN Line may cause the OBi110 to reboot.
This is known issue in firmware version 1.2.0.2101; although it might not happen to all units.
(This problem is triggered by the S4 in LINE Port/DigitMap parameter for 7-digit dialing; you can
also avoid this problem by removing S4 from that DigitMap).
A fix is already available. Please upgrade your firmware again (to latest version 1.2.0.2102).
You can use OBiTALK portal to upgrade the firmware.
Note: If you are already on 1.2.0.2102, you can also upgrade by picking up the phone on the OBi,
dial *** and select Option 6, Listen to the Announcement, and press 1 to confirm upgrade
(OBi will start upgrade after you hang up).
Thank you.
yhfung:
Yes, the reboot problem IS FIXED after I hvae updated the firmware version to 1.2 2102.
YH
tkc9789:
Not sure if this is the right place for this question. My wife calls HK/Taiwan/China averaging about 1000 minutes a month. We're currently using Vonage. Which VoIP provider do you recommend if I'm to switch to OBi1100/GV to make international calls from the U.S. And yes, I'm hoping to save some hard earn $$ with OBi1100. Thank you!
yhfung:
Before answer your questions, may I ask a few questions:
1) Monthly expenses on telephone bill to HK/China/Taiwan
2) Are the called parties the same?
3) Are the called parties dealing with business partners or family members?
YH
Navigation
[0] Message Index
[#] Next page
[*] Previous page